|
| This gauge is very alike to the default GPS included
in FS9 in what concerns to its way of operation. We will talk here about
the differences implemented by FriendlyPanels. |
| The main differences are: |
| • Rose movement smoother |
| • Included tunning features for COM1,
COM2, NAV1 and NAV2 with their respective navigation information like
distances, bearings, etc....(see pictures below) in left side of the
screen. |
| • Improved readability to avoid opening
a new window and can read the gauge information. |
| • Navaids displayed in map modes are
now selectable (like in the real one), allowing you to have a clearer
view sometimes. |
| • Needles indicator VOR1 and VOR2 |
| Clicking areas |
|
| |
1. Swap COM1/COM2 (the one showed in
left panel) stand by and acive frequencies |
|
| |
2. On / Off switch |
|
| |
3. Swap NAV1/NAV2 (the one showed in left panel)
stand by and acive frequencies |
|
| |
3. Ident switch |
|
| |
4. Displays COM1 / NAV1 or COM2 / NAV2 data in
left panel. |
|
| |
6 and 16. Tune frequency highlighted integer figures |
|
| |
7 and 9. Tune frequency highlighted fractal figures |
|
| |
8. Swaps fequency to tune COM or NAV |
|
| |
10. Displays information concerning the radios
or the flight plan in left panel. |
|
| |
11 and 15. Outer knob |
|
| |
12 and 13. Inner knob |
|
| |
14. CRSR |
|
| Selecting Navaids to display |
| To do this push CRSR, the navaids menu
will appear, then use outer right knob to select the type of navaid and
inner right knob to select navaid ON (displayed) or OFF (hidden). Then
push CRSR again. You can clear your map view removing VORs, NDBs, AIRPORTS,
INTERSECTIONS, AIRSPACES or even the flight plan route lines. |
|
| Swaping left panels |
|
|
